Airtac - DMS,EMS,CMS
-
Airtac CMS: Cylinder Position Sensor The standard model -CMSG-020
The standard model,G specifications,direct lead wire:2m,general type,Mounting bracket not included. Compatible with the following air cylinder series:HFK,HFKL,ACQ/TACQ,SDA,TWQ,TCL/TCM,QCK,TWH/TWM,SAU,HFZ,HFY,HFP,MD/MK,AQK/BAQK,TR,STW,MCK.PB/PBR,MI/TMI,MF,MG,MA/MAC,MBL,MCK,TWG.SC,SGC.
$11.79
-
Airtac DMS: General type,solid state sensor -DMSH-PM08
General type,solid state sensor,H specifications,output type:PNP,Wiring type：Quick connect fitting.M08:M8Quick connect fitting+0.5mWire length,general type,Mounting bracket not included. Compatible with the following air cylinder series:ACQ/TACQ,TC,HFZ,HFY,HFP,HFR,HFC,HFT,QDK,HLQ/HLQL,HLS/HLSL,MU,HLH,MPG,HRQ,HFK,HLF,HGS,RMH,HFD,HFKL,HFCQ.
$14.29
-
Airtac DMS: General type,solid state sensor -DMSG-020
General type,solid state sensor,G specifications,output type:2 wire,direct lead wire:2m,general type,Mounting bracket not included. Compatible with the following air cylinder series:HFK,HFKL,ACQ/TACQ,SDA,TWQ,TCL/TCM,QCK,TWH/TWM,SAU,HFZ,HFY,HFP,MD/MK,AQK/BAQK,TR,STW,MCK.PB/PBR,MI/TMI,MF,MG,MA/MAC,MBL,MCK,TWG.SC,SGC.
$10.36
-
Airtac CMS: Cylinder Position Sensor.The industry of mechanical arms The standard model -A05-CMSE-020
The industry of mechanical arms,E specifications,direct lead wire:2m,general type,Mounting bracket not included. Compatible with the following air cylinder series:SE/BSE,SAI/TSAI,ACE/JSI
$13.93
-
Airtac CMS: Cylinder Position Sensor The standard model -CMSE-M12
The standard model,E specifications,Wiring type：Quick connect fitting.M12:M12Quick connect fitting+0.5mWire length,general type,Mounting bracket not included. Compatible with the following air cylinder series:SE/BSE,SAI/TSAI,ACE/JSI
$16.43
-
Airtac CMS: Cylinder Position Sensor The standard model -CMSE-050
The standard model,E specifications,direct lead wire:5m,general type,Mounting bracket not included. Compatible with the following air cylinder series:SE/BSE,SAI/TSAI,ACE/JSI
$15.36
-
Airtac DMS: General type,solid state sensor -DMSE-P030
General type,solid state sensor,E specifications,output type:PNP,direct lead wire:3m,general type,Mounting bracket not included. Compatible with the following air cylinder series:SE/BSE,SAI/TSAI,ACE/JSI
$14.29
-
Airtac DMS: General type,solid state sensor -DMSH-PM08010
General type,solid state sensor,H specifications,output type:PNP,Wiring type：Quick connect fitting.M08010:M8Quick connect fitting+1mWire length,general type,Mounting bracket not included. Compatible with the following air cylinder series:ACQ/TACQ,TC,HFZ,HFY,HFP,HFR,HFC,HFT,QDK,HLQ/HLQL,HLS/HLSL,MU,HLH,MPG,HRQ,HFK,HLF,HGS,RMH,HFD,HFKL,HFCQ.
$15.71
-
Airtac DMS: General type,solid state sensor -DMSH-N030
General type,solid state sensor,H specifications,output type:NPN,direct lead wire:3m,general type,Mounting bracket not included. Compatible with the following air cylinder series:ACQ/TACQ,TC,HFZ,HFY,HFP,HFR,HFC,HFT,QDK,HLQ/HLQL,HLS/HLSL,MU,HLH,MPG,HRQ,HFK,HLF,HGS,RMH,HFD,HFKL,HFCQ.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12C100
Accessory,connecting wire,M12 socket,3-wire type,10meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$25.71
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12C050
Accessory,connecting wire,M12 socket,3-wire type,5meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12C030
Accessory,connecting wire,M12 socket,3-wire type,3meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12C020
Accessory,connecting wire,M12 socket,3-wire type,2meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12B100
Accessory,connecting wire,M12 socket,2-wire type,10meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12B050
Accessory,connecting wire,M12 socket,2-wire type,5meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12B030
Accessory,connecting wire,M12 socket,2-wire type,3meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12B020
Accessory,connecting wire,M12 socket,2-wire type,2meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08C100
Accessory,connecting wire,M8 socket,3-wire type,10meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$22.86
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08C050
Accessory,connecting wire,M8 socket,3-wire type,5meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08C030
Accessory,connecting wire,M8 socket,3-wire type,3meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08C020
Accessory,connecting wire,M8 socket,3-wire type,2meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08B100
Accessory,connecting wire,M8 socket,2-wire type,10meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08B050
Accessory,connecting wire,M8 socket,2-wire type,5meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08B030
Accessory,connecting wire,M8 socket,2-wire type,3meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08B020
Accessory,connecting wire,M8 socket,2-wire type,2meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.
$14.29
-
Airtac DMS/EMS/CMS: Sensor,accessory,tie rod cylinder accessory - F-SC250SH
Accessory,tie rod cylinder accessory,code:250,for bore size:Φ250,attached:SH Compatible with the following air cylinder series:SC,SGC.
$10.00
-
Airtac DMS/EMS/CMS: Sensor,accessory,tie rod cylinder accessory - F-SC160SH
Accessory,tie rod cylinder accessory,code:160,for bore size:Φ160、Φ200,attached:SH Compatible with the following air cylinder series:SC,SGC.
$10.00
-
Airtac DMS/EMS/CMS: Sensor,accessory,tie rod cylinder accessory - F-SC125SH
Accessory,tie rod cylinder accessory,code:125,for bore size:Φ125,attached:SH Compatible with the following air cylinder series:SC,SGC.
$10.00
-
Airtac DMS/EMS/CMS: Sensor,accessory,tie rod cylinder accessory - F-SC80SH
Accessory,tie rod cylinder accessory,code:80,for bore size:Φ80、Φ100,attached:SH Compatible with the following air cylinder series:SC,SGC.
$10.00
-
Airtac DMS/EMS/CMS: Sensor,accessory,tie rod cylinder accessory - F-SC63SH
Accessory,tie rod cylinder accessory,code:63,for bore size:Φ63,attached:SH Compatible with the following air cylinder series:SC,SGC.
$10.00
-
Airtac DMS/EMS/CMS: Sensor,accessory,tie rod cylinder accessory - F-SC50SH
Accessory,tie rod cylinder accessory,code:50,for bore size:Φ50,attached:SH Compatible with the following air cylinder series:SC,SGC.
$10.00
-
Airtac DMS/EMS/CMS: Sensor,accessory,tie rod cylinder accessory - F-SC32SH
Accessory,tie rod cylinder accessory,code:32,for bore size:Φ32、Φ40,attached:SH Compatible with the following air cylinder series:SC,SGC.
$10.00
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS63
Accessory,cylinder accessory,stainless steel code:Φ63mm,for bore size:Φ63 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS50
Accessory,cylinder accessory,stainless steel code:Φ50mm,for bore size:Φ50 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS40
Accessory,cylinder accessory,stainless steel code:Φ40mm,for bore size:Φ40 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS32
Accessory,cylinder accessory,stainless steel code:Φ32mm,for bore size:Φ32 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS25
Accessory,cylinder accessory,stainless steel code:Φ25mm,for bore size:Φ25 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS20
Accessory,cylinder accessory,stainless steel code:Φ20mm,for bore size:Φ20 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS16
Accessory,cylinder accessory,stainless steel code:Φ16mm,for bore size:Φ16 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS12
Accessory,cylinder accessory,stainless steel code:Φ12mm,for bore size:Φ12 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS10
Accessory,cylinder accessory,stainless steel code:Φ10mm,for bore size:Φ10 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS08
Accessory,cylinder accessory,stainless steel code:Φ8mm,for bore size:Φ8 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQS06
Accessory,cylinder accessory,stainless steel code:Φ6mm,for bore size:Φ6 Compatible with the following air cylinder series:PB/PBR,MI,MF,MG,MA/MAC
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQA50T
Accessory,cylinder accessory,aluminum alloy(thick type) code:Φ50mm,for bore size:Φ50 Compatible with the following air cylinder series:TWG.
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQA40T
Accessory,cylinder accessory,aluminum alloy(thick type) code:Φ40mm,for bore size:Φ40 Compatible with the following air cylinder series:TWG.
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQA32T
Accessory,cylinder accessory,aluminum alloy(thick type) code:Φ32mm,for bore size:Φ32 Compatible with the following air cylinder series:TWG.
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQA80
Accessory,cylinder accessory,aluminum alloy code:Φ80mm,for bore size:Φ80 Compatible with the following air cylinder series:MCK,MBL,MAL.
$8.57
-
Airtac DMS/EMS/CMS: Sensor,accessory,cylinder accessory - F-MQA63
Accessory,cylinder accessory,aluminum alloy code:Φ63mm,for bore size:Φ63 Compatible with the following air cylinder series:MCK,MBL,MAL.
$8.57
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"