Airtac - DPH
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10050G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 5m/outer tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10050T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 1000kPa/line length 5m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10050
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 5m/outer tooth PT1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10030G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 3m/outer tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10030T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 1000kPa/line length 3m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10030
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 3m/outer tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10020G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 2m/outer tooth G1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10020T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 2m/external tooth NPT1/8; Internal teeth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-10020
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 1000kPa/line length 2m/external tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01050G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 100kPa/wire length 5m/outer tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01050T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 100kPa/line length 5m/external tooth NPT1/8; Internal teeth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01050
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 100kPa/line length 5m/external tooth PT1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01030G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measured pressure range:-100kPa ~ 100kPa/wire length 3m/outer tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01030T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 100kPa/line length 3m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01030
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 100kPa/line length 3m/external tooth PT1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01020G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 100kPa/wire length 2m/outer tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01020T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 100kPa/wire length 2m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3B-01020
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 100kPa/wire length 2m/external tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10050G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 1000kPa/line length 5m/external tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10050T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 1000kPa/line length 5m/external tooth NPT1/8; Inner tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10050
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 1000kPa/line length 5m/external tooth PT1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10030G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 1000kPa/line length 3m/external tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10030T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measured pressure range:-100kPa ~ 1000kPa/line length 3m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10030
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 1000kPa/line length 3m/external tooth PT1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10020G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 1000kPa/line length 2m/external tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10020T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 1000kPa/line length 2m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-10020
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 1000kPa/line length 2m/external tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01050G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 100kPa/line length 5m/external tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01050T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measured pressure range:-100kPa ~ 100kPa/line length 5m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01050
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 100kPa/line length 5m/external tooth PT1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01030G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measured pressure range:-100kPa ~ 100kPa/line length 3m/external tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01030T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measured pressure range:-100kPa ~ 100kPa/line length 3m/external tooth NPT1/8; Internal teeth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01030
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 100kPa/line length 3m/external tooth PT1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01020G
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measured pressure range:-100kPa ~ 100kPa/line length 2m/external tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01020T
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measured pressure range:-100kPa ~ 100kPa/line length 2m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHP3-01020
Electronic digital display pressure sensor (analog output type)/PNP + analog current output (4 ~ 20mA)/terminal type power connection/measuring pressure range:-100kPa ~ 100kPa/line length 2m/external tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10050G
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 5m/outer tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10050T
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 1000kPa/line length 5m/external tooth NPT1/8; Internal teeth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10050
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 5m/outer tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10030G
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear wire type power connection/measured pressure range:-100kPa ~ 1000kPa/wire length 3m/outer tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10030T
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 3m/external tooth NPT1/8; Internal teeth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10030
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 1000kPa/line length 3m/external tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$93.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10020G
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear wire type power connection/measured pressure range:-100kPa ~ 1000kPa/wire length 2m/outer tooth G1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10020T
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 2m/external tooth NPT1/8; Internal tooth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-10020
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 1000kPa/wire length 2m/external tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$90.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-01050G
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear wire type power connection/measurement pressure range:-100kPa ~ 100kPa/wire length 5m/outer tooth G1/8; Inner tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-01050T
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 100kPa/line length 5m/external tooth NPT1/8; Internal teeth: 10-32UNF Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
-
Airtac DPH:Air source treatment unit - Auxiliary components/electronic digital pressure sensor (analog output type)-DPHN3B-01050
Electronic digital display pressure sensor (analog output type)/NPN + analog current output (4 ~ 20mA)/rear line type power connection/measurement pressure range:-100kPa ~ 100kPa/line length 5m/external tooth PT1/8; Internal tooth: M5 Notes:1.Do not drop,knock or apply excessive impact while handling.Otherwise could cause damage and a malfunction.2.The tensile strength of the cord is 60N.Applying a greater pulling force on it can cause a malfunction.3.Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor. 4.Do not use it with corrosive and/or flammable gases or liquids.5.Please use it within rated pressure range.6.Turn off the power before connecting the wires.7.Don't use in an environment with spattering liquid of oil or solvent.8.Separate power lines from high voltage lines,avoiding wiring in the same conduit with these lines.
$96.00
You have seen 48 out of 144 products