Airtac - HFKL
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL25F
Airfinger(Singleactingandnormallyopened),25mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL20F
Airfinger(Singleactingandnormallyopened),20mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL16F
Airfinger(Singleactingandnormallyopened),16mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL10F
Airfinger(Singleactingandnormallyopened),10mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL25N
Airfinger(Singleactingandnormallyopened),25mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL20N
Airfinger(Singleactingandnormallyopened),20mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL16N
Airfinger(Singleactingandnormallyopened),16mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL10N
Airfinger(Singleactingandnormallyopened),10mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL25B
Airfinger(Singleactingandnormallyopened),25mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL20B
Airfinger(Singleactingandnormallyopened),20mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL16B
Airfinger(Singleactingandnormallyopened),16mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL10B
Airfinger(Singleactingandnormallyopened),10mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL25
Airfinger(Singleactingandnormallyopened),25mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL20
Airfinger(Singleactingandnormallyopened),20mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL16
Airfinger(Singleactingandnormallyopened),16mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFTKL:Airfinger(Single acting and normally opened)- HFTKL10
Airfinger(Singleactingandnormallyopened),10mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL25F
Airfinger(Singleactingandnrmallyclosed),25mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL20F
Airfinger(Singleactingandnrmallyclosed),20mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL16F
Airfinger(Singleactingandnrmallyclosed),16mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL10F
Airfinger(Singleactingandnrmallyclosed),10mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL25N
Airfinger(Singleactingandnrmallyclosed),25mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL20N
Airfinger(Singleactingandnrmallyclosed),20mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL16N
Airfinger(Singleactingandnrmallyclosed),16mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL10N
Airfinger(Singleactingandnrmallyclosed),10mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL25B
Airfinger(Singleactingandnrmallyclosed),25mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL20B
Airfinger(Singleactingandnrmallyclosed),20mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL16B
Airfinger(Singleactingandnrmallyclosed),16mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL10B
Airfinger(Singleactingandnrmallyclosed),10mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL25
Airfinger(Singleactingandnrmallyclosed),25mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL20
Airfinger(Singleactingandnrmallyclosed),20mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL16
Airfinger(Singleactingandnrmallyclosed),16mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFSKL:Airfinger(Single acting and nrmally closed) - HFSKL10
Airfinger(Singleactingandnrmallyclosed),10mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFKL: Air finger(Double acting) - HFKL25F
Airfinger(Doubleacting),25mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFKL: Air finger(Double acting) - HFKL20F
Airfinger(Doubleacting),20mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFKL: Air finger(Double acting) - HFKL16F
Airfinger(Doubleacting),16mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFKL: Air finger(Double acting) - HFKL10F
Airfinger(Doubleacting),10mmbore,F:Bottommounting Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFKL: Air finger(Double acting) - HFKL25N
Airfinger(Doubleacting),25mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFKL: Air finger(Double acting) - HFKL20N
Airfinger(Doubleacting),20mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFKL: Air finger(Double acting) - HFKL16N
Airfinger(Doubleacting),16mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFKL: Air finger(Double acting) - HFKL10N
Airfinger(Doubleacting),10mmbore,N:Thru.holemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFKL: Air finger(Double acting) - HFKL25B
Airfinger(Doubleacting),25mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFKL: Air finger(Double acting) - HFKL20B
Airfinger(Doubleacting),20mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFKL: Air finger(Double acting) - HFKL16B
Airfinger(Doubleacting),16mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFKL: Air finger(Double acting) - HFKL10B
Airfinger(Doubleacting),10mmbore,B:Sidemountingtype Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07
-
Airtac HFKL: Air finger(Double acting) - HFKL25
Airfinger(Doubleacting),25mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$219.00
-
Airtac HFKL: Air finger(Double acting) - HFKL20
Airfinger(Doubleacting),20mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$183.64
-
Airtac HFKL: Air finger(Double acting) - HFKL16
Airfinger(Doubleacting),16mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$167.14
-
Airtac HFKL: Air finger(Double acting) - HFKL10
Airfinger(Doubleacting),10mmbore,Standard Product feature:1.Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2.Don't use the air gripper under strong external force and impact force.3.Please contact with us when the single acting type clamps only with the spring force.4.When install and fix the air gripper, avoid falling down, collision and damage.5.When fixing the gripping jaw parts, don't twist the gripping jaw.6.There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
$160.07